Rubber Disc V3640661-0100

OPTIPOW105 RUBBER DISC V3640661-0100

Starmachinechina Disc Rubber V3640661-0100 is die-casting made of TPU (Thermoplastic polyurethanes). TPU (Thermoplastic polyurethanes) is a mature environment-friendly material with excellent characteristics of high tension, high tension, strength and aging resistance. TPU (Thermoplastic polymers) has the characteristics of high strength, good toughness, wear resistance, cold resistance, oil resistance, water resistance, aging resistance, weather resistance, etc. that other plastic materials cannot match. At the same time, it has many excellent functions, such as high water resistance, moisture permeability, wind resistance, cold resistance, antibacterial, mold resistance, heat preservation, ultraviolet resistance, energy release, etc.

STARMACHINECHINA DISC RUBBER V3640661-0100 FEATURES:

1. Its wear resistance is much better than that of traditional materials. Under the conditions of CS17 grinding 

wheel, 1000g/wheel, 5000r/m, 23℃, the wear resistance of Starmachinechina Machinery Valve Disc Rubber 

V3640665-0500 is 2.2 times that of nylon material;

2. Flexible hardness adjustment. By changing the ratio of TPU reaction components, products with various 

hardness can be prepared. The product still maintains good elasticity after the hardness is improved, enabling

 Starmachinechina Valve Disc Rubber V3640665-0500 to have stronger environmental adaptability;

3. High mechanical strength. Starmachinechina Optipow109 General Purpose Valve Disc Rubber V3640665-0500

 has excellent impact resistance, shock absorption and pressure-bearing capacity. Starmachinechina Safety Valve

 Disc Rubber V3630534-0500 has a low glass transition temperature, and still maintains good physical properties

 at minus 35 degrees, with excellent cold resistance;

4. Starmachinechina Air Filter Disc Rubber V3640665-0500 is oil-resistant, water-resistant and mold-resistant, 

recyclable, and its environmental protection performance meets industrial environmental protection standards.

FUNCTION

Volume A connected to the pressure tank, via the slot between the valve house and the plunger. There is same pressure in the volume A as in the pressure tank. Due to the larger pressurised surface of the plunger in volume A, the plunger is pressed towards the pulse pipe and seals between the pressure tank and the pulse pipe. The volume B is via the solenoid valve connected to the pilot air. The area is larger on pilot air side so the pilot membrane is pressed down towards the top of the valve house and seals off the volume A from the ambient.

◆ RUBBER DISC PARAMETERS

◆  Plunger Pulse Solenoid Valve Optipow 105