product_banner

Product

Product Details

Optipow 105 Air Cleaning Pulse Valve 220VAC

The Optipow 105-type air cleaning valve is designed for high-performance reverse-pulse cleaning of fabric filter bags. Its compact tank-mounted construction provides rapid opening, a strong cleaning pulse and reliable closing for demanding industrial dust collection systems.

Technical Specifications

Valve TypeTank-mounted air cleaning pulse valve
SeriesOptipow 105 compatible type
Solenoid Voltage220VAC
Working MediumClean, dry and filtered compressed air
Recommended Working Pressure0.4-0.6 MPa
Operating Temperature-40°C to +130°C
Installation PositionVertical installation recommended
Valve BodyCast aluminium alloy
Plunger and Sealing ComponentsWear-resistant industrial materials
Electrical ConnectionDIN-style connector
ApplicationFabric filter and baghouse cleaning system

Product Features

  • Rapid opening and closing for a powerful cleaning pulse

  • Compact design for direct installation on the compressed-air tank

  • Durable plunger and sealing structure for repeated pulse operation

  • Stable pilot control with 220VAC solenoid coil

  • Low air leakage and efficient compressed-air utilization

  • Simple inspection and replacement of wear components

  • Suitable as a replacement valve for compatible Optipow 105-type systems

Working Principle

When the cleaning controller energizes the solenoid, pilot pressure above the plunger is released. The pressure difference lifts the plunger rapidly and discharges compressed air from the tank into the pulse pipe. When the electrical signal ends, pilot pressure is restored and the plunger closes against the pulse pipe, completing the cleaning cycle.

Installation Guidelines

  • Depressurize and clean the air tank before installation.

  • Remove rust, welding residue, dust and other particles from the tank.

  • Check that the pulse pipe sealing surface is smooth and free from burrs.

  • Install the valve vertically unless the system design specifies otherwise.

  • Confirm that the solenoid voltage matches the control power supply.

  • Tighten mounting bolts evenly in a cross pattern.

  • Use clean and dry pilot air at approximately the same pressure as the tank.

Maintenance

Regularly inspect the plunger, seals, pilot diaphragm, solenoid coil and air passages. Drain condensate from the air tank and maintain the air filter to prevent contamination. Replace worn sealing parts when leakage, slow response or weak pulse performance is observed.

Applications

Suitable for pulse-jet fabric filters used in thermal power plants, cement plants, steel and metallurgical facilities, mining operations, glass production and other industrial dust removal systems.

Ordering Information

Please specify the required voltage, installation orientation, operating temperature and quantity when requesting a quotation. Product dimensions and compatibility should be confirmed before ordering.

Inquire Now

alex@starmachinechina.com

+8615863027667

+8615863027667